check mail l fmscrm l contact us                                                         home

l profile l collaboration l quality l network l                               

8/1, "SAI SUDHA", ARUNODAY SOCIETY, ALKAPURI, VADODARA Tel. : 2358174, 2331193 Fax : 0265-2338733
INDUSTRIAL
Your Leakage Problem ......................................... Our Concern

YOUR PROBLEM ? ......................... OUR SOLUTION

SOLUTION
Only applying waterproofing paints will not solve your problem. It needs detailed investigation to find out the actual cause. If there are any cracks, it needs to be determined, in the first place, as to why cracks have developed in the walls. A well designed and constructed structure should have no reason to developed cracks. If the cracks are larger and there is some doubt the structural design then show the wall first to a local structural engineer to rule out any structural inadequacies.

However if the cracks are small and there is no problem with structure and if the consultant recommends use of a flexible crack-filling compound then CRACKSEAL can be used for filling the cracks.

Once cracks are filler, clean the surface and apply WATERGUARD S in the two coats at an interval of 4-5 hours. It is an acrylic based elastomeric coating that has been specially formulated for external heavy duty waterproofing applications. It is UV resistant, durable, ready to use and can be tinted to match the shade of your building.

It is important that, if the cracks exist on the surface above your floor then they also need to be treated.

 

SOLUTION
Before treating damp patches it is always advisable to investigate the root cause-such as porous concrete, cracks in external plaster, leakage in concealed plumbing, etc, and rectifying the same before commencing treatment. Subsequently the damp patched can be treated by
WATERGUARD DAMPROOF which can also be applied on wet condition and does not allow further appear. IT is two component water based epoxy coating. Before applying WATERGUARD DAMPROOF, removal of paint on the affected are is a must.

Ensure that WATERGUARD DAMPROOF is applied on the bare plastered surface. Apply two coats at an interval of 2-3 hours. Repainting can be done on the effected are after 1 day. However it is advisable to allow curing of 7 days.

YOUR PROBLEM OUR SOLUTION
TECHNICAL WRITEUP
top
RESIDENTIAL
Copyright@2006 Fairmate Chemicals Pvt. Ltd.
Email : sales@fairmate.net