|
“Concrete
to be caste should be Modified with water reducing, waterproofing
admixture FAIRCRETE RMW @150ml / 50Kg of Cement. & all
construction joints to be given bond coat of FAIRBOND EP over old
concrete surface and all slope to be maintained towards
drainage/outlet end. (to
be under the scope of main/civil contractor, possible L/s Chemical
Cost /Sq.ft./4”thickness slab/raft=Rs.1.75/Sq.ft..).”
WATERPROOF
BASE PREPARATION:
01-Cleaning
and washing of the surface with Wire brush /Broom.
02-Fixing
G.I.SPOUT, at the lowest end, towards SHAFT, The tail end should be at
least 100mm away from finished wall surface.
03-Repairing/Rehabilitation
CI/PVC pipe to masonry joint and SPOUT to masonry joint with modified
Acrylic Cementitious (w/p) Mortar/putty using FAIRCRETE SB (L) @ 5 %by
Wt. of Cement, followed with sealing CI/PVC pipe to masonry joints
with FAIRSEAL (In case of dry surface) or with Acrylic modified putty
of CRACKSEAL (in case of
wet surface).
04-Making
fillet GALTA all around by using modified Acrylic Cementitious screed
(1:2:2), by adding FAIRCRETE RMW at construction joints @ 150 ml per
50Kg bag of cement.
WATERPROOF
COATING
Applying
two coats of Acrylic polymer modified coating of WATERGUARD A.
PROTECTION
LAYER
Applying
waterproof cover plaster (12 mm thick) of 1:4 cement: coarse sand Zone
-II by adding FAIRPLAST IP 200 gm / 50Kg of cement Followed with neat
cement slurry punning.
COST
All
above including Labor
& Chemicals (Waterproofing&1nsulation
)= Rs.21/-Sq.ft. for min. area of 5,000 Sq.ft. Supported with
on site Engineer /
supervision ,during casting & laying ,through our authorized trained applicators.
where
as Cement ,Sand, Aggregates , Brick bats ,Water , Electricity to be
provided free of cost, At level of working .
EXTRA
COST (for additional features)
Application
of Tile/ Marble adhesive FAIRFIX TA for
4-6 mm thickness @ Rs7.50/Sq.ft
& Tile fixing labour @ Rs.6/Sq.ft.,followed with suitable
/matching colour grouting with FAIRFIX TG (To make watertight /crack
free joint) |
